康泰克 端子台 电气连接
通用压接用转接端子台 EPD-100A
Screw Terminal (M3 x 100)
EPD-100A
The products is a general purpose terminal fastened with screws, which relays the I/O wirings of CONTEC interface board/card or card with a 100-pin 0.8mm-pitch connector. The pins in connector correspond to their respective terminals on the terminal strips on a one-to-one basis, allowing you to easily connect the board/card to an external device via the terminal strips. A round shape terminal, and a Y form terminal are available together. Note: To connect a board/card to the accessory, option cable can be purchased separately.
Certification
Environmental
RoHS Directive
Features
Up to 100 signal lines can be connected.
The signal line from outside machinery can be connected to terminal easily by only a screw(can use it for a round shape terminal, Y form terminals).
Equipped with the [Spring-up] type terminal to prevent the terminal screws from being lost.
The optional cable can be used to connect easily to the board/card.
Optimized configuration of board wiring
Signal banks can be mounted on DIN rails.
